The Ultimate Primer punch is the only primer punch that has interchangeable punch tips. This allows you to knock out the primer on once fired shells or tighten the primer pockets on shells that have been shot multiple times by keeping the primer pockets tight, the pressure inside the shell remains high, making the velocity of your ammo more consistent. Tight primer pockets also keep gas and debris from flying back into your receiver, which is the most common reason why some guns misfire or even brake firing pins.
Performs 5 Separate functions on station #1
– Deprimes
– Reconditions (Tightens) the Primer Pocket
– Swages the upper end of the hull
– Cleans the upper end of the hull
– Adjustable flare for opening crimp folds
– Exclusive Interchangeable Primer Punch Tips
– Completely Adjustable
– Black Oxide Finish
– Fits the PW 375, the 800 plus, the 800B, the 800C, the 900, the 950 Elite, and the 2000 Platinum
This Ultimate Primer Punch is an absolute must if you are looking to upgrade your reloading machine and make reloading easy.
Description
Performs 5 Separate functions on station #1
– Deprimes
– Reconditions (Tightens) the Primer Pocket
– Swages the upper end of the hull
– Cleans the upper end of the hull
– Adjustable flare for opening crimp folds
– Exclusive Interchangeable Primer Punch Tips
– Completely Adjustable
– Black Oxide Finish
– Fits the PW 375, the 800 plus, the 800B, the 800C, the 900, the 950 Elite, and the 2000 Platinum
“This Ultimate Primer Punch is an absolute must if you are looking to upgrade your reloading machine and make reloading easy.”
Reviews (33)
33 reviews for The Ultimate Primer Punch – Ponsness Warren
Rated 5 out of 5
Richard M. –
The ultimate primer punch and case trimmer are very good quality and do a great job for what they are designed. I previously purchased these 2 items for my 12 and 20 gauge presses and finally decided to get them for my 410 press.
Rated 5 out of 5
Randolph J. –
Bought for a P&W 800b, when my hulls would get pretty worn my loader wouldn’t flare the hull wide enough to allow the wad fingers to function properly and end up with wad insertion issues or split the hull causing a train wreck with the loader. I installed this punch and it flares the hull so well I decided to put it to the test, I had 200 STS hulls that I was getting ready to toss in the trash from being completely worn out. Run all 200 without one single issue, shot them the following weekend and run them through again without one single failure, Absolutely the very best upgrade you can do to you reloader! Highly recommend!!
Rated 5 out of 5
DON McFarland –
I have two of the ultimate primer punches, the one I just purchased for my Ponsness Warren 800 LS and the one that I’ve had for about a year and a half for my MEC 9000E. I have had no problems with the primer pockets when I use Cheddite primers.
Rated 5 out of 5
Kevin Doran –
A brilliant design to perform needed decapping, swagging and hull inside cleaning at one station
Rated 5 out of 5
Jack Wall –
I install ultimate primer punch on all of my presses
Rated 5 out of 5
John Piccioni –
Rated 5 out of 5
Ron Wilson –
Works like a charm. Be converting some of the mec’ over soon
Rated 5 out of 5
Nathon Fiorenzo –
Perfect for those stubborn to open hulls. Takes a little adjusting to get it right dot the hull but once it’s set it is just plain awesome.
Rated 5 out of 5
Robert –
Rudy is the best in the business. Great customer service. Highly recommend any of his products.
Rated 5 out of 5
VOUGHN –
Been reloading for over 50 years and I wish I had this when I started, Top Quality and easy to set up, Thanks for a great product I will be looking at your other products.
Rated 5 out of 5
James –
Excellent quality
Rated 5 out of 5
Steve Lessard –
Very happy about my new tool, work great and solve the problem. Nice upgrade
Rated 5 out of 5
Richard Hoppis –
No more primers that leak
Rated 5 out of 5
Donald B. –
All CRS products are top notch.
Rated 5 out of 5
Roger F. –
Fabulous product, makes the primer pocket new again. A must have for any reloader!
Rated 5 out of 5
Jerry –
I am very happy. Great product and fabulous customer service. I strongly recommend them.
Rated 5 out of 5
JAMES RAQUET –
Worked great in PW 900 Elite. Had to adjust primer hole swage lower than directions for the Fiocchi hulls. Swage didn’t contact base just punching out primer Able to use
Cheddite primers, only thing I can find
Rated 5 out of 5
JOHN Piccioni –
So easy to adjust and works awesome. great products
Rated 5 out of 5
Mark McCoy –
This thing is very nice, a big help when loading older hulls. We have a metric ton of hulls we have been shooting for ever, probably should sort and discard many of them, but with this new feature we are getting create crimps and good wad sealing!
Rated 5 out of 5
Craig D. –
Adjustable and works well.
Rated 5 out of 5
Ric –
I just installed the punch on my Ponsness/Warren 800+ 12 gauge press. I have loaded around 500 shells with it so far, and I am impressed. It makes Gun Club hulls run through the machine noticeably smoother. Not one wad seating inconsistency.
Rated 5 out of 5
Bob P. –
Still experimenting with this, but like what it’s done so far
Rated 5 out of 5
Gregg A. –
The primer punch is made to OEM quality, and allowed me to put a small flare on my hulls. This solved the wad feeding problem I was having with some of my older AA hulls.
This should come from the factory for all presses..
Rated 5 out of 5
David Boles –
Solve the problem when putting the wad in the shell
Rated 5 out of 5
Miguel Yamuni –
Unbeatable quality and craftsmanship . Well thought out upgrade for my PW shotshell reloaded . It’s amazing how smooth the reloaded works after the shells are reconditioned by the Ultimate primer punch!
Rated 5 out of 5
Anonymous –
makes reloading easier…
Rated 5 out of 5
Richard Musiello –
Rated 5 out of 5
shayne compton –
With today’s component availability I take my hulls to the end of their life. For me, the adjustment for expanding the hull mouth has really been helpful on those crispy folds. I hate to admit that but that’s where I’m at. I have this primer punch on two Ponsness and 1 mec and am glad they are available.
Rated 5 out of 5
Kenneth Earp –
It definitely works as designed and described by Rudy! I am almost out of Winchester 209 primers. I will use the Cheddite 209 primers next, then go back to Winchester 209 primers to see the results. I don’t expect any surprises, just great results.
Thank you, Rudy!
Rated 5 out of 5
George K –
I bought this a few months ago for my Ponsness Warren 800 +. It works fantastic and does all that Rudy says it does. In these days of having to use primers that are slightly larger it is great to resize the primer pocket back to normal size. Well worth the investment. Small price to pay for a great addition to my press.
Rated 5 out of 5
Bob Williams –
I bought the primer punch for my Ponsness. Best improvment I have made to the press. No more wad insertion problems. The adjustment is easy and effective. Thanks Rudy.
Rated 5 out of 5
Don S. –
The Ultimate Primer Punch for my 800 B fit just like it was intended to be. Very good workmanship on the part. I got it set up the way you instructed and it seems to be doing what it is suppose to be doing. The primer pocket conditioner is working great to get the over size primer hole back to American primers.
Rated 5 out of 5
Gregg Kay –
I have a Ponsness Warren 800 Plus. Rudy has now made an adapter for the 800 Plus to allow his primer punch to fit my machine. I installed it and it works great! I can highly recommend changing the stock primer punch for Rudy’s, it loads so much better. The primer pocket is re-conditioned, the case mouth is opened a little more and there is no more sticking or hanging up when the wad is inserted. And talk about customer service, Rudy was not sure his modifications were going to fit my PW so he sent it to me without even asking for money to make sure it would fit. It does. So if you have a Posness Warren 800 Plus you now have the option of using this primer punch, which you definitely should.
Richard M. –
The ultimate primer punch and case trimmer are very good quality and do a great job for what they are designed. I previously purchased these 2 items for my 12 and 20 gauge presses and finally decided to get them for my 410 press.
Randolph J. –
Bought for a P&W 800b, when my hulls would get pretty worn my loader wouldn’t flare the hull wide enough to allow the wad fingers to function properly and end up with wad insertion issues or split the hull causing a train wreck with the loader. I installed this punch and it flares the hull so well I decided to put it to the test, I had 200 STS hulls that I was getting ready to toss in the trash from being completely worn out. Run all 200 without one single issue, shot them the following weekend and run them through again without one single failure, Absolutely the very best upgrade you can do to you reloader! Highly recommend!!
DON McFarland –
I have two of the ultimate primer punches, the one I just purchased for my Ponsness Warren 800 LS and the one that I’ve had for about a year and a half for my MEC 9000E. I have had no problems with the primer pockets when I use Cheddite primers.
Kevin Doran –
A brilliant design to perform needed decapping, swagging and hull inside cleaning at one station
Jack Wall –
I install ultimate primer punch on all of my presses
John Piccioni –
Ron Wilson –
Works like a charm. Be converting some of the mec’ over soon
Nathon Fiorenzo –
Perfect for those stubborn to open hulls. Takes a little adjusting to get it right dot the hull but once it’s set it is just plain awesome.
Robert –
Rudy is the best in the business. Great customer service. Highly recommend any of his products.
VOUGHN –
Been reloading for over 50 years and I wish I had this when I started, Top Quality and easy to set up, Thanks for a great product I will be looking at your other products.
James –
Excellent quality
Steve Lessard –
Very happy about my new tool, work great and solve the problem. Nice upgrade
Richard Hoppis –
No more primers that leak
Donald B. –
All CRS products are top notch.
Roger F. –
Fabulous product, makes the primer pocket new again. A must have for any reloader!
Jerry –
I am very happy. Great product and fabulous customer service. I strongly recommend them.
JAMES RAQUET –
Worked great in PW 900 Elite. Had to adjust primer hole swage lower than directions for the Fiocchi hulls. Swage didn’t contact base just punching out primer Able to use
Cheddite primers, only thing I can find
JOHN Piccioni –
So easy to adjust and works awesome. great products
Mark McCoy –
This thing is very nice, a big help when loading older hulls. We have a metric ton of hulls we have been shooting for ever, probably should sort and discard many of them, but with this new feature we are getting create crimps and good wad sealing!
Craig D. –
Adjustable and works well.
Ric –
I just installed the punch on my Ponsness/Warren 800+ 12 gauge press. I have loaded around 500 shells with it so far, and I am impressed. It makes Gun Club hulls run through the machine noticeably smoother. Not one wad seating inconsistency.
Bob P. –
Still experimenting with this, but like what it’s done so far
Gregg A. –
The primer punch is made to OEM quality, and allowed me to put a small flare on my hulls. This solved the wad feeding problem I was having with some of my older AA hulls.
This should come from the factory for all presses..
David Boles –
Solve the problem when putting the wad in the shell
Miguel Yamuni –
Unbeatable quality and craftsmanship . Well thought out upgrade for my PW shotshell reloaded . It’s amazing how smooth the reloaded works after the shells are reconditioned by the Ultimate primer punch!
Anonymous –
makes reloading easier…
Richard Musiello –
shayne compton –
With today’s component availability I take my hulls to the end of their life. For me, the adjustment for expanding the hull mouth has really been helpful on those crispy folds. I hate to admit that but that’s where I’m at. I have this primer punch on two Ponsness and 1 mec and am glad they are available.
Kenneth Earp –
It definitely works as designed and described by Rudy! I am almost out of Winchester 209 primers. I will use the Cheddite 209 primers next, then go back to Winchester 209 primers to see the results. I don’t expect any surprises, just great results.
Thank you, Rudy!
George K –
I bought this a few months ago for my Ponsness Warren 800 +. It works fantastic and does all that Rudy says it does. In these days of having to use primers that are slightly larger it is great to resize the primer pocket back to normal size. Well worth the investment. Small price to pay for a great addition to my press.
Bob Williams –
I bought the primer punch for my Ponsness. Best improvment I have made to the press. No more wad insertion problems. The adjustment is easy and effective. Thanks Rudy.
Don S. –
The Ultimate Primer Punch for my 800 B fit just like it was intended to be. Very good workmanship on the part. I got it set up the way you instructed and it seems to be doing what it is suppose to be doing. The primer pocket conditioner is working great to get the over size primer hole back to American primers.
Gregg Kay –
I have a Ponsness Warren 800 Plus. Rudy has now made an adapter for the 800 Plus to allow his primer punch to fit my machine. I installed it and it works great! I can highly recommend changing the stock primer punch for Rudy’s, it loads so much better. The primer pocket is re-conditioned, the case mouth is opened a little more and there is no more sticking or hanging up when the wad is inserted. And talk about customer service, Rudy was not sure his modifications were going to fit my PW so he sent it to me without even asking for money to make sure it would fit. It does. So if you have a Posness Warren 800 Plus you now have the option of using this primer punch, which you definitely should.